Identification

Commander for BMW allows you to establish diagnostic session with each electronic control unit in the vehicles and to perform following actions:
•Read and clear stored DTCs (diagnostic trouble codes)
•Read and clear history DTCs
•Read and clear shadow DTCs
•Added DTCs in 17 languages: English, German, French, Thai, Swedish, Italian, Spanish, Indonesian, Korean, Greek, Turkish, Chinese, Chinese traditional, Russian, Dutch, Portuguese, Japanese
•DTC conditions information (Odometer value, Timestamp, full engine status report for EDC17)
•Coding / Configuration of the unit
•Disable and Enable DTCs setting while diagnostic session
•Program part identification number *
•Program User Information Memory of the electronic control unit (history from part programming)
•Check about part number, production date, producer and part specific information

Using unique technique of AVDI  for BMW in few second you will have overview of vehicle status 

ZN001- TAG PROGRAMMER

This programmer works with AVDI interface. It also is compatible with our software commander for VAG, BMW, Renault, Nissan, Mercedes, Fiat and all our commanders
For all key programming or transponder programming on AVDI   you have to buy the tag programmer Zn001 . the tag programmer Zn001 cannot program without the AVDI interface and  the  special functions for key / transponder  programming  

Supported transponders:

oT5/NOVA
oTK5551
oTK5561
oTemic 11
oTemic 12
oTemic 8C
oMegamos 13 (fixed identifier)
oMegamos 48 (Megacrypt I)
oMegamos 8E (Megacrypt II)
oTexas TIRIS 4C  
oTexas TIRIS 4D
oTexas TIRIS 4E
oTexas DST+
oPhilips PIT - 7930/7931/7935
oPhilips HITAG2 – 7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7952, 7953, 7961
oPhilips HITAG-Pro – 7937, 7938, 7939, 7952
oPhilips HITAG-Extended
oJMA – TPX1 (cloning of Texas 4C)
oJMA – TPX2 (cloning of Texas 4D/4E)

ZN001 - TAG programmer – price is  480 euro

BMW COMMANDER 

AVDI Diagnostics for BMW, MINI is a Windows based diagnostic software for dealer level access to the vehicles of the BMW group (identification, trouble codes and others), calibration, key programming, programming vehicle order is also available. This tool can access CAS1, CAS2, CAS3 and CAS3+ by OBDII independently from the firmware of the CAS. You can perform impossible for other diagnostic tools operations with the electronic modules inside of the vehicle such as programming Vehicle Order and Coding of electronic control units. Access to the memory of the units in the vehicle. Covers vehicles BMW series starting from E36 up to the latest models F series (F01,F10,F20,F25 and s.o.).

Functions included in the base package

• Identifying all the modules
• Read and clear stored DTCs (diagnostic trouble codes). You can also see DTC conditions information, how often they occurred and at what mileage.
• Read and clear history DTCs
• Read and clear shadow DTCs
• Added DTCs in 17 languages: English, German, French, Thai, Swedish, Italian, Spanish, Indonesian, Korean, Greek, Turkish, Chinese, Chinese traditional, Russian, Dutch, Portuguese, Japanese
• DTC conditions information (Odometer value, Timestamp, full engine status report for EDC17)
• Disable and Enable DTCs setting while diagnostic session
• Some DTCs (mostly those of the F series) are given detailed documentation of what caused the problem and how the problem should be handled
• Measured values/live data
• Entering and leaving logistics mode of the modules in the vehicle
  Synchronization DME/DDE and EWS/CAS, CAS and ELV
• Enable / Disable of the keys
• Enable / Disable of TV function for E3x,E46,E5x,E83,E85,E86 (for later models it is available via unit coding)
• Ability for diagnostics of and through internal CAN buses
• Displaying KEY CUTTING code (mechanical code) stored in CAS modules
• EBRIDGE/Pass-through - Compatibility with BMW - E-Sys, DIS, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus 

Special functions

AIR BAG

Read/Write complete EEPROM of airbag control units Siemens (CAN bus - ISO15765). Audi A6/Q7/Allroad, VW Golf5..., Skoda Octavia II ..., Seat Altea ...
- With this special function you can Read/Write EEPROM memory of the airbag module
- Clear the crash data of the airbag module