In the new version of the AVDI for Subaru we now have coverage for the latest Subaru BRZ:
- New Subaru BRZ Smart systems added (2017+)
- Improved diagnostics for SUBARU BRZ and new models Subaru vehicles.
The support covers the systems when a master key is present, All keys lost will be added in the next update.

In Version 2.5 of the AVDI for JLR you can expect to see new airbag modules supported for reading and writing. This is a function very helpful when clearing the Crash data.
Basically, the Land Rover and Jaguar XC23xx airbags are all supported so this will help anyone who restores damaged vehicles of these brands.
Here are just some of the examples:
BJ32-14C246-xx
CX23-14C246-xx
CK52-14C246-xx
EJ32-14C246-xx
FH22-14C246-xx
GK62-14C246-xx
EX53-14C246-xx
HPLA-14C246-xx

In the new version of the AVDI for PSA we are now able to cover even more Continental BSI 2015+ modules building on the existing features already included in the software.
The new version will allow better work speed, more stable connection and new software versions of the BSIs made by Continental to be covered.

We are proud to announce that the AVDI for Mitsubishi. As you probably know this is where the future for our company's development and all of our future features will be online.

The time has come for the "Three diamonds" to receive the online treatment. Here is what you will see in this version:
- Read DTC
- Clear DTC
- Module Identification
- New flashing capabilities available for many electronic control units.
- Renew of FBS4 control modules including 7G Tronic units 722.9. ALL BY OBD or internal CANBUS.
- Renew of FBS4 CRD 3.X Engine Control Units. ALL BY OBD or internal CANBUS.
- Displaying status of FBS4 components in the vehicle.
- DPF regeneration and renewal for Mercedes Diesel Vehicles (including the DELPHI diesel ECUs)
- DPF running time value reset
With the above mentioned update our customers will have the accumulation of all currently available Mercedes tools in one at less than half the price thus making AVDI and AVDI for Mercedes the ultimate Mercedes-Benz tool.

The biggest update to the AVDI for Mercedes since the release of DAS manager.
Major updates will be available with the next update to the AVDI for Mercedes.
CODING and FLASHING FEATURES, we are now able to adopt new features, perform retrofits, and change the behavior of modules and others. This is available in a comprehensive and easy to use online version for most Mercedes - benz and AMG models including the latest such as W222 new S- class and W166 GLE, new C class W205, new E class W213. The new flashing and coding allow an almost endless configuration and some of the most popular and needed features are made as simple and easy functions for coding such as: functions. Here are just some of the new features we will be able to help you achieve with a single click:
- Enabling and disabling of the seatbelt alarm system, for example, W205/ W222/ W217/ W166 new models.
- Enabling and disabling of the MAX SPEED Limit (MED for the new //AMG models including A45 AMG, CLA45 AMG, GLA 45 AMG, C43 AMG and all the related models)
- Enabling and disabling of the Video in motion (VIM) for older and newer cars up to 2018
- Enabling and disabling of the AMG start screen for older and new Mercedes-benz models.
- Enabling and disabling of "CAR PLAYER" (Apple car play), etc. In some cases an update is needed and this can be done using the AVDI FLASHING in Mercedes - benz for phone screen mirroring for example.
- Ability to calibrate the sunroof.
- Ability to calibrate 360 degree cameras, enable, coding, including Special Vehicle Solution (SVS).
- Enabling, disabling and calibrating the Special Vehicle Solution front camera.
- Mercedes Special Vehicles Solutions rear view mirror cameras enabling, disabling and calibrating.
- ADBlue enabling - when the ADBlue mileage reaches "0" and you are not able to drive the car to the workshop you can now reactivate the car in order to re-start the car.
- With the upcoming version, we will be able to provide SCN and variant coding for the MED40, MED177, VGSNAGx ECUs allowing for coding of features such as the speed restrictor for the S63 ///AMG models which will assist Mercedes specialists immensely.

In the upcoming version of the AVDI for VAG you can expect the following new features:
- Reworked the procedure for adaptation of EZS-Kessy from A6 (2005-2010) and Q7 (2006-2014).

- Reworked the procedure for adaptation of Transmission of A6 (2005-2010) and Q7 (2006-2014).

- Reworked the procedure for adaptation of Immo V ECU for the BCM2 cars (now it is possible to adapt the ECU completely by OBDII for the ECUs until 2013, for the other ECUs it is no longer necessary to write the flash back to the ECU).

- Reworked the procedure for adaptation Immo III/Immo IV ECU/TCU (VN005). Adapting the devices without using EM003 emulator.

- ME17.5.24 is now supported - PIN/CS is read from the internal CAN bus

- Cluster calibration completely by OBD for Audi A6/A7 (4G), Audi A8 (4H), VW Touareg (7P) available with the VN010 function for cars produced after 2010+

- New versions of the EZS Kessy related modules added for component protection as well as new versions of MMI modules added across the Generation I and II.

- Added support for Component protection for 09-Central electric module with Quorriva MCU

In the upcoming version of the AVDI for Renault 31.5 you can expect the following new features:

- PIN reading and card programming for the following models in the new RR017 special function:
• Renault Talisman 2015+
• Renault Espace 2015+
• Renault Megane IV 2016+
• Renault Scénic IV 2016+
- Autoliv Airbag Clear Crash for Talisman, Megane IV, Scenic IV, Espace V, Kadjar
- Virgin Engine Control Module (ECM) adaptation for Clio IV, Twingo III, Trafic III, Logan II, Sandero II, Duster Ph2, Dokker, Lodgy
- PIN reading speed improved on poor internet connection
- Clio IV, Logan II, Sandero II, Dokker, Lodgy, Duster Ph2 2015+ PIN reading support improved
- General diagnostic improvements - identification of UDS vehicles improved, live data items order fixed
- Recovering of Smart453 possible with RR015 license
As with all AVDI online software we are constantly improving and adding features and improving what is already there. The beauty of the online software is that you can receive every update without installation and anything more than a minute to let the latest version download while you are online.

We are very happy to announce the new features available in the upcoming version of the AVDI for Fiat/ Alfa/ Lancia/ Chrysler/ FCA - 7.3. In it our developers are ready with the reading of the PIN codes of the new Chrysler models such as the Chrysler Pacifica from 2017+, Dodges of the similar years and others. This function will be a free addition to all FN017 owners with a valid AMS.

Remote frequency hub modules (RFH) direct CAN support (for the cases when direct connection to the internal CAN is needed.

Also new in the upcoming version will be the addition of the BCM from Delphi with NEC 70F3632/70F3633. They will be supported for Reading/Writing of Flash and Data Flash. Again this will be available for customers with the FN017 and a valid AMS.

In the upcoming version of the AVDI for Opel/ Vauxhall version 7.3 we will proudly introduce the reading of the Security Code:

- Insignia B - Instrument Panel Cluster (IPC) - 4.2 inch Color Display [Free for all the customers who currently have the ON013 special function]