In version 4.1 of the AVDI for Hyundai and KIA you can expect to see the following:

New versions of the BCM modules added for PIN code reading - our support base for KIA and Hyundai vehicles is growing constantly, since the last update we have been adding new versions, new models for many Hyundai and KIA cars. With the help of the AVDI.

for Hyundai and KIA, we can make more and more keys for a very big percentage of the cars produced for Europe, America and Korea. More specifical updates below:

- Added support for key teaching for Smart Key Unit with key slot. The previously unsupported models with a slot are now covered for PIN code reading and key programming.

-Added support for PIN code reading for Smart Key Unit with key slot. Covered in version 4.1

-Added diagnostics for CAN UDS Smart Key Unit and CAN UDS BCM.

- Numerous new diagnostic features for the Hyundai and KIA cars Worldwide, now we can perform diagnostics to cars with CAN/ UDS protocol and assist with diagnostics for them.

HK008 and a VALID AMS are required for PIN CODE and KEY PROGRAMMING

In version 7.4 we will now have the option to produce transponders for the FIAT IDEA after 2008 in the Transponder maker tool. With this functionality the ability to produce a transponder and make a key for this model will be significantly easier. There are also many improvements to the interface and the functionality allowing easy workflow and simplified usage. Free for all customers with a valid AMS and FN017

In the new software update we will have a completely new online software for the AVDI for Nissan and Infiniti. With it we continue the trend to create new online software to update and replace the old offline software with the easy to use new interface which allows us to create new functions and make the software easier to use. The online software platform also allows us to make changes on the fly to add test features for our customers and to create new functions without the necessity to send large update files to be installed on your computer.

In version 7.9 of the AVDI for PSA you can find the following new features: - Improved support for Continental UDS BSI 2015+, Delphi CAN BSI 2013+ and JCI CAN BSI 2015+. Key programming will now be easier, reading the PIN code will take less time than before and we have new BSI modules added to our support list. - Improved support for Citroen C5 II dashboards 2015+. Cluster calibration for the previously unsupported clusters added, new models, easier access and faster operation. Free for all customers with a valid AMS and PN015 - Improved support for KLINE Siemens BSI used in Peugeot 206, Berlingo.

With version 31.6 of the AVDI for Mercedes we continue the trend to add new ECUs and models for SCN coding. All of our latest developments can be seen in the new software version. This update will include the following: - 72 new electronic control units added for coding, together they have 925 new software variations, all of which include up to 717 new SCN coding abilities. - All of these electronic control units have been included for SCN coding with a special attention to FBS 4 vehicles such as W217 and W282.

In version 31.6 of the AVDI  for Renault/ Dacia Online software you can expect to see even more development through the online platform. We now have the following new fetures: - Added renew UCH of Talisman, Megane IV, Scenic IV, Espace V. This allows the replacement of fautly UCH modules of this new generation of the Renault vehicles. Free for all customers with a valid AMS and RR014 - Added adaptation UCH, ESL and Engine of Talisman, Megane IV, Scenic IV, Espace V. For the same reason as above we can replace a faulty UCH in the latest generation of Renault vehicles.

With version 10.6 besides the numerous improvements to the existing functionality we can now clone the DST40 transponders used in TESLA vehicles. With the help of the TAG key tool and PROTAG this will be possible once the new version is released. Free for all customers with a valid AMS and KT010

Here are the new features and improvements to the AVDI for BMW/ Mini/ Rolls Royce version 31.6 - Latest ISTA-P software versions added for the coding and programming of modules also for module replacement. Our customers can now benefit from the following ISTA- P versions which are the latest possible: (64.0.600 , 64.2.000, 65.1.002) and SDP 4.11.30. Applicable for customers who have BN012 and a valid AMS. - New software and firmware versions of the ZF 8HP EGS gearboxes added for replacement, we now support 12 new versions ready for 8 HP replacement and coding.

In version 35.0 of the AVDI for VAG you can expect to see the following new features: - Reading the PIN/CS from Magneti Marelli 9GV engine control unit (requires DSBox). A new function for the new Magneti Marelli 9GV ECUs, the ECUs are now supported for adaptation and PIN/CS extraction. - MED 17.5.21/MED17.5.24 PIN/CS decoding. This will allow the adaptation of these ECUs using IMMO parts adaptation or IMMO V adaptation depending on what car they are installed in. Free for all customers with a valid AMS and VN004 - EDC17C74/EDC17CP54 immo off.

FBS4 Manager is a special function dedicated to the latest generation Mercedes- Benz FBS (DAS) related modules. It is where all the functions for FBS4 (around 2015+) vehicles will be developed. For the moment the focus of the function falls on its service related abilities. It allows the following for modules installed in Mercedes vehicles equipped with the FBS4 generation of DAS:

- Renewal of FBS4 control modules including 7G Tronic units 722.9. ALL BY OBD or internal CANBUS.

- Renewal of FBS4 CRD 3.X Engine Control Units. ALL BY OBD or internal CANBUS.

N.B. Please note that you will require an AVDI interface with an active AMS in order to use this special function. Absolutely no tokens required.