Mercedes / Daf

Twitter

                                            MERCEDES COMMANDER 6.4  

The Mercedes Commander is a professional software for diagnostic of Mercedes-Benz vehicles.
It allows you to perform complete diagnostics for all 1995-present Mercedes-Benz models.
It provides some unique functions, which are not supported by any other diagnostic tool.

Diagnostics is performed via the OBD-II connector or via Mercedes-Benz proprietary 38-pin connector  (only older cars, pre-2001). Our PC USB diagnostic interface supports over 26 multiplexed K-Lines and Mercedes-Benz  diagnostics CAN-BUS interface (also known as CAN-D).

 Standard  diagnostic functions : 

•  Read Identification 
•  Read extended identification
• Read / clear  fault codes
• Scaning for control units  / clearing fault codes in all  control units 
• Display of actual values
• Actuator tests
• Reset of control units 
• Control unit adaptations
• Adjustment  of  injector injection quantities adaptation for Diesel Engines  (CDI-4 ,CDI - 5 )

Click here  To know what function and which control units are supported when you have a certain special function

Special Functions 

• BY OBDII -Comprehensive odometer correction for W221 and W216 vehicles. The odometer changed in the following units: CGW, EZS, Instrument Cluster and all other units, which store the odometer (like Tire Pressure Monitor and Adaptive Brake, for example) , Read/Write service history records in ZGW of W221 S-Class and W216 CL, Read/Write complete EEPROM and Flash of CGW (Central gateway) of W221 S-Class and W216 CL, Odometer correction in dashboard for Vito, Viano, Sprinter after 2006 year E-Class W211, CLS W219, GL X164, ML W164, R-Class W251, C-Class W203 and G-Class W463  A-Class W169, B-Class W245

• BY OBDII - Odometer correction for W204/W212/X204/W197/W207 vehicles. The odometer is changed in the following units: ASSYST, ASSYST Plus, EZS, Instrument Cluster

• By OBDII - Read/Write EEPROM of Dashboard control units, ESP, Sensotronic Brake Control (SBC) and many others... Online manual for Sensotronic Brake Control Repair ALL FAULT TYPE 
• CLICK HERE FOR DOWNLOADING THE  SBC REPAIR  USER MANUAL  

• By OBDII - Airbag - Read/Write EEPROM, Clear Crash Data, Erase Motohours

• Dump Tool - calculate odometer values, reset odometer values, clear airbag crash data, make engine control virgin .... etc

•  By OBDII - ECU - Read/Write Flash, Read/Write EEPROM of Engine Control Units

•  DAS-2 - Generation of key dumps for vehicles with DAS-2 Immobilizer system

• By OBDII - DAS-2b - Key Learning for Mercedes W163; Read/Write EEPROM of AAM/EAM control modules; Learn radio code of transmitter keys; Deactivate/Reactivate keys

•  Transponder generation 

•  By OBDII - TV/AUX activation/deactivation

• By OBDII - TV/AUX activation/deactivation
• By OBDII - Seatbelt warning activation/deactivation  
• By OBDII - Reverse warning activation/deactivation
• By OBDII - Activation/deactivation of Speed warning for Gulf States
• Electrical Steering Lock (ESL) - Read/Write/Unlock EEPROM of ESL for the following vehicles: W202, W208, W209, W210, W203, W211, W219 by direct connection to the ESL module. Please, note that in order to erase or write the EEPROM of this type of ESL you need to have the ESL database. Please, find the links for the ESL database here: ESL Database
  
• Electrical Ignition Switch (EIS, K-Line) - Read EEPROM of EIS and ESL modules by diagnostic connection to the EIS module; Open/Close ESL

• Electrical Steering Lock (ESL, CAN) - Disable/Enable keys; Write VIN of new units; Activate/Deactivate ESL; Activate/Deactivate EZS

•  Generation of Dumps for programming keys for cars, which use DAS-3 system. With the IR Key Manager special function you can generate keys for the following vehicles: W203, W208, W209, W210, W211, W215, W219, W220, W230, W639. The generated dumps should be programmed in the EZS, ESL and the key. For the key all NEC processors and the following Motorola processor is supported: MA 567 880 051, 654 367 2004 . For all owners of MN005 license - If you have a Motorola key (it doesn't matter if it is working key or not, as long as it is from the same car) we can send you working key dumps without the need to disassemble, desolder and read the EZS! Just read the EZS by diagnostics from the Special Function "EIS K-Line" and send the dump together with the dump from the Motorola key to [email protected]" . We will send you working key dumps FREE of charge within 1 working day.

• ZN002 - NEC programer - for NEC MCU's assembled in the IR-Keys

• By OBDII - Change ASSYST PLUS Service maintenance records

• By OBDII - Read/Write COMPLETELY EEPROM of Central Gateway (CGW) via OBDII. Works for the following vehicles : W211, W171, W219, W164, X164, W169, W245, W204, W212, X204, W218 

• Custom request 
  

• By OBDII - SMART key teach-in (K-Line and CAN)

• By OBDII - Renew of 7-Gear Electronic Transmission Control Unit (722.9)

   http://www.youtube.com/watch?v=vgTri6Vujtw&;feature=youtu.be

 Advanced functions: 

•  Custom memory read/write 
•  Custom requests

P.S:  Depending on the  version that you have purchased some of these functions may not be availbale in your software  .

Prices of the Special  functions  :

MN020  -- 1730 EURO  Instrument Cluster Data Manager
Updating data memory instrument clusters W221, W216, W219, X164, W164, W203, W251, W463, R171, W209, W220, W215, W169, W245, Smart (2007+), W204, X204, W212, W197, W207, W218,W168,  W202, W140, W210, W211, W461, W208, W163, W230, Sprinter, Vito, Viano. Modifying ASSYST and ASSYST PLUS service history records; Updating data memory in Battery Control Module, Tire Pressure Monitor, Electric Seat Adjustment Driver and Electric Seat Adjustment Passenger, Rear Signal Acquisition and Actuation Module 1, Electronic Stability Program (ESP), Airbag, Electronic Parking Brake, Vehicle Power Supply Control Module.

MN021  -- 385 EURO TV, ECU, Airbag Manager
Reading and updating flash and configuration memory of ECUs: Siemens SID, EDC15, EDC16. Service list update. TV, AUX on/off configuration. Ability for managing stored crash data and configuration memory of electronic control unit.

MN022--- 675 EURO Key Programming and EIS/ESL Data Manager
Generating of key dumps for vehicles with DAS-2, DAS-2A, DAS-2B, DAS-3.Smart key programming.  Read partially data of the EIS. Read/update configuration data of the ESL.

MN023 --- 1920 EURO 7-gear ETC and ISM recalibration
Resetting ETC (722.9) and ISM by diagnostic to the factory state without losing of SCN coding.

http://www.youtube.com/watch?v=vgTri6Vujtw&;;feature=youtu.be

The special function requires a database, which can be downloaded from here: http://update2.abritus72.net/downloads/Abritus-7-Gear-Database_05092012.exe

INTELIGENT SERVO MODULE DEMO  

Additional cables and programmers : 

• 38 pin Circle MB Cable - 24 euro 
• 14 pin Circle MB Cable - 24 euro 
• Cable for connecting AVDI and ESL(ELV) - 24 euro
• Cable for connecting AVDI and dashboard W203, W209, W211, W219 - 24 euro
• ZN002 - NEC programmer - 240 euro

Wiring diagrams for connecting and diagnosing control units out of the vehicle. 

Download the zip pdf folder these are user manual for comprehensive Mileage Recalibration

P.S :  you need our diagnostic interface AVDI to order the special functions .

      Mercedes nec key programming via infrared

 MB nec device , no need to send us the EIS anymore !
Device can program extra key to any EIS type ,repair a damaged key without removing any part
Repair MB 204 steering lock  and program new steering lock

A clear video for all procedure will be added after holiday on our you tube channel

Mercedes device can program new key ,fix or repair defective esl or program any ELV type like GL/204 steering lock  in few seconds.
With our device u don’t need  to virgin or erase the eis, also it will not erase the original working key .

P.S: For all customers who want to program only key without ESL  can buy the device excluding ESL option .

click here for our you tube video

    MB DUMP KEY GENERATOR FROM EIS

Now you can generate up to 8 keys BY YOURSELF .MB key generator from EIS DUMP ONLY without removing any part even for MB cars with 7 gears ,all you have to do is to read the EIS dump generate keys and start the car .

Supports  HC05 ,HC08,HC12,9S12 ,NEC EZS,204,221,212,207,164 .

Our software has a micro auto detect , all what you need is just to load the file  .

 NEW UPDATE IS AVAILABLE FOR A AND B CLASS 

 NEW : YOU CAN GENERATE KEYS WITHOUT TIME LIMIT SAME FOR A AND B CLASS

click here to see our youtube video for MB DUMP  

http://www.youtube.com/watch?v=dCGGpQUdlo0 

 MERCEDES EIS KEY TEST

plug the test key in any mercedes EIS

key led will show you if the eis is woking or deffective

              MB SOFTWARE

WITH OUR NEW  MB SOFTWARE YOU CAN GENERATE KEYS RENEW ECU UP TO 2006
 IN FEW SECONDS, YOU CAN USE OUR SOFTWARE FOR IR OR NEC PROGRAMMER .

UNIVERSAL MERCEDES TRANSPONDER FOR E / C AND G CLASS

This transponder is prepared  to program directly to the car ,just insert the key into the ignition and the transponder will program itself immediately  to start the car .

each transponder has its own number from 1 to 8 so you can program up to 8 keys to the same car .

price : 10 EURO

               MB  NEC PROGRAMMER

Mercedes NEC key programmer 

             Commander for DAF 1.0

Key learning by OBDII. No need FOR A  PIN code. Supported models from 2002-2008 year

Prices of the special functions:

 *DF002 - Key learning- 720 euro 
 FULL - all special functions - 720 euro

 MB ORIGINAL TESTING CABLE FOR 203 / 209/211 

              MB NEC KEY SOCKET

 Mercedes kits for Old 140/ Old SLK / Old 210 with HFM ECU AND EFZ with a flip key

 Das /202/208/210/203/209/211/220/230 with ME2.0 / ME 2.0

 We Have universal steering lock for 202/208/210/203/209/211 steering lock

(NO NEED TO USE STARDIAG TO PROGRAM IT) Ready to work price 100 USD