CanGateway - Logger is a dual channel device which allows logging Can signals on microSD card in real time. It supports both 29-bit and 11-bit CAN identifiers and ISO 15765 protocols. Additionally, high quality processor (200 MHz) guarantees minimum consumption of power and optimum performance. 
Basic functions are
Ability to logging to two CAN-BUS channels in real time with CAN-Gateway function
CAN-BUS signal generating such as Ignition, RPM, speed, switches (for programming, testing ECU’s outside car).
CAN-BUS messages modification, filtering.
CAN-BUS signal converting (for programming, testing ECU’s outside car).
Logger - description
- CAN-Gateway function - converting CAN signals with different speeds.
- CAN-BUS Logging frames from two channels with same or different speeds.
- Filtering CAN-BUS frames according to script.txt file.
- Generating CAN-BUS frames according to script.txt file.
- Modification of CAN-BUS frames according to script.txt file.
- Electronic CAN-BUS termination resistors.
- Power supply - 5 Volts or 12 Volts.
- Software update using microSD card.
- The possibility of modification and configuration via PC tool - CanGateway Manager.
- No loss of any CAN- BUS frames when logging into two channels at the same time, with maximum speed.
- The additional option for a software update in the system/car using DiagProg4 diagnostic tester.
Functions
• Ability to logging to two CAN-BUS channels in real time with
CAN-Gateway function.
• CAN-BUS signal generating such as Ignition, RPM, speed, switches
(for programming, testing ECU’s outside car).
• CAN-BUS messages modification, filtering.
• CAN-BUS signal converting (for programming, testing ECU’s outside car)
CanGateway - Logger includes
CanGateway - Logger device, microSDHC card - 32GB, CD with manual and PC tool CanGateway Manager, dedicated carry case, installation kit, ON/OFF adapter ( adapter allows to restore vehicle installation to factory state).
Conditions of purchase
CanGateway - Logger - 299 euro
